HD3MDIP/X Network Camera Reference Guide
Document 800-04132V1 Rev A 63
01/10
Audio Settings
The network camera supports bi-directional audio. There are two supported voice band
channels that function in full duplex mode. Connect industry-standard line level audio input
and output to the back of your camera. See Connecting Alarms on page 20 for more
information.
Audio configuration for your network camera is straightforward.
Figure 4-15 Audio Settings
To listen to or capture audio from the camera, enable the Camera to Client (PC) check box
( ). To listen to audio from the client (PC), enable the Client (PC) to
Camera check box.
To Next Page
Loading...
