108
System Administration and Equipment Handling
Resetting the Dome and Camera Lens
Resetting the dome is the same as cycling power to the dome. The dome
configuration remains unchanged. Resetting the lens reverts to the default
zoom, focus, and iris settings.
To reset the dome:
1. From the OSD main menu, press 4 to select Diagnostic Options.
2. Press 7 to select Scan and Dome Reset.
To reset the camera lens:
1. Click the Live View tab.
2. In the PTZ Settings panel, in the Preset Details box, type 98, and then
click Goto.
Rebooting the Dome
To reboot the dome:
1. Press ESC four times.
The dome reboots and you are logged off the ACUIX™ IP web client
application.
2. Log on to ACUIX™ IP web client application.
To Next Page
Loading...
