Honeywell equIP Series - Overview of the ACUIX IP Web Client Application; Figure 4-3 PTZ Controls

30
Preparing to Configure the Dome
Overview of the ACUIX™ IP Web Client Application
The ACUIX IP web client application has six tabs for configuring and controlling
the dome:
• Live View
• Device Information
•PTZ Dome Setup
• Compression Settings
• Video Analytics
• PTZ Protocol Setup
Note You must be logged on as an administrator to see all of the tabs.
Users logged on as guests only see the Live View tab.
Live View
In the Live View tab, you can control the dome’s pan, tilt, zoom, focus, and iris.
To control the dome:
• Use the PTZ controls at the right of the screen (see Figure 4-3 and
Table 4-1).
• Alternatively, click anywhere in the video image and drag your mouse in the
direction you want the camera to move. If your mouse has a scroll wheel,
use it to zoom in and out.
Figure 4-3 PTZ Controls
Zoom Out
Focus Far
Auto Focus
Focus Near
Zoom In
Iris Close
Auto Iris
Iris Open