Honeywell Experion C300 - UTP;TCP Tab

C300 Controller Block
UTP/TCP tab
92 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
Plain Text Parameter Name
User
Configurable
Notes
Number of FTE
Nodes
NUMFTENODES
No
Current number of FTE
nodes within FTE
community.
Max Number of FTE
Nodes
MAXFTENODES
No
Maximum number of FTE
nodes that have been
detected within FTE
community.
Max Device Index
MAXNODEID
No
Highest Device Index
supported within FTE
community.
IP Checksum Errors
BADIPCSUM
No
Number of FTE IP
messages which were
received but determined
as having bad IP
checksums.
UDP Checksum
Errors
BADUDPCSUM
No
Number of FTE UDP
messages which were
received but determined
as having bad UDP
checksums.
UTP/TCP tab
The UDP/TCP tab displays statistics related to open UDP and TCP connections
associated with this C300 Controller. These parameters provided here are used for
maintenance and performance monitoring purposes. The following table summarizes the
parameter data you can monitor on the UDP/TCP tab of the configuration form for the
selected C300 block.
Plain Text Parameter Name
User
Configurable
Notes
UDP/TCP
Local UDP Listeners
UDPLISTENERS
No
Shows path information for
all open ports on the FTE
Bridge module.