Configure CEEC300 block
To configure a CEEC300 function block
42 Experion C300 Controller User's Guide R301.1
Honeywell 11/06
Configure CEEC300 block
A CEE block is created automatically when a C300 Controller function block is added to
the Project tab.
Prerequisites
• Control Builder is running
• Tree windows are open
Considerations
All illustrations used in the procedure are for example purposes only.
To configure a CEEC300 function block
Step Action Result
1
In the Project window, right-click on the
CEEC300_BLK block icon.
Calls up shortcut menu.
2
Click Module Properties...
Calls up CEEC300 Block configuration
form. The Tag name field is highlighted.
To Next Page
Loading...
