6 Supplement for ES-200XP Applications — P/N LS10387-000FL-E:A 2/23/2023
Peripheral Devices and Their Documents:
1.1 Features and Options
• Pre-installed CLSS Pathway Pro
1.4 Components
CLSS Pathway Pro Communicator
The pre-installed CLSS Pathway Pro is a dual-path cellular communicator which runs on 24VDC power from the panel. It supports both
AT&T and Verizon LTE networks, and uses either of them with a stronger signal. It transmits Contact ID data from the fire panel to the cen-
tral monitoring station.The CLSS communicator transmits system status (alarms, troubles, AC loss, etc.) via ethernet or cellular network.
Addressable Devices and SLC Wiring Doc. #51309
Wireless Gateway Doc. #LS10036-000FL-E
CHG-120F Charger
Doc. #50888
ANN-BUS - TB9/TB10
SLC Loop - TB12
Battery Connector - J15
es200annperi.wmf
ANN-80
LCD Text Annunciator
Doc. #52749
ANN-I/O
LED Driver
Doc. #151416
ANN-S/PG
Printer Driver
Doc. #151417
CHG-75 Charger
Doc. # 51315
ANN-(R)LED
LED Display
Doc. #53032
ANN-RLY
Relay Card
Doc. #53033
4XTMF
Reverse Polarity Module
J12 & J13
ANN Audio Control for ECC-50/100 Doc. #LS10001-000FL-E
CLSS Pathway Pro
Doc. #LS10340-000HW-E
J6
PWRMOD24 NAC Power Expander
Doc. #LS10085-000GE-E
J16
J7
J15
ANN-100
LCD Text Annunciator
Doc. #LS10205-000FL-E
To Next Page
Loading...
