Operating Instructions
168 MS-9050UD PN 52413:C 01/23/08
4.22.13 Service Terminal
Pressing 1 for Ring Count, while viewing Read Status Screen #5 will display the following screens:
4.22.14 Print
To print program data or control panel status, press 2 while viewing Read Status Screen #5. The
following screens will be displayed:
Pressing 1 while viewing Print Screen #1 allows the user to print the History file which will detail
all of the system activities since the file was last cleared from memory.
Pressing 2 while viewing Print Screen #1 allows the user to print the Walktest log which will detail
all of the system activations during walktest since the log was last cleared. Refer to "Walktest" on
page 104 for additional information on the display.
READ STATUS
1=RING COUNT
2=PRINT
3=TIME-DATE
Read Status Screen #5
SERVICE TERMINAL
RING COUNT 03
Service Terminal Screen
READ STATUS
1=SERVICE TERMINAL
2=PRINT
3=TIME-DATE
Read Status Screen #5
PRINT
1=HISTORY
2=WALKTEST LOG
3=DETECTOR DATA
PRINT
1=EXIT PRINTING
Print Screen #2
Print Screen #1
To Next Page
Loading...
