Honeywell Fire-Lite Alarms MS-9050UD - ANN-I;O Connection and LED Wiring

Product Description
30 MS-9050UD PN 52413:C 01/23/08
1.9.5.3 ANN-I/O Connection to FACP
The ANN-I/O connects to the FACP via the ANN-BUS as illustrated in Figure 1.2. After the
ANN-I/O is connected to the panel, it must be added to the system via FACP programming.
Refer to the section titled "Modules Installed" on page 106.
Figure 1.2 ANN-I/O Connection to FACP
ANN-I/O Module
MS-9050UD
ANN-BUS and power wiring are
supervised and power-limited
ann-IOtoFACP.cdr