Honeywell Fire-Lite Alarms MS-9050UD - Enabled

Programming
96 MS-9050UD PN 52413:C 01/23/08
The following screens will be displayed for each selection:
3.6.5.5.1 Enabled
Pressing 1 while viewing NAC Screen #1 will cause the display to change to Enabled No. This
will prevent the selected main circuit board NAC from activating its devices. Each press of the
1 key will cause the display to toggle between Enabled Yes and Enabled No.
NAC #
1=ENABLED YES
2=TYPE BELL
3=SILENCEABLE YES
NAC Screen #1
NAC #
1=ZONE
00 ** ** ** **
2=SIL INHIBITED NO
NAC Screen #2
NAC #
1=AUTO SILENCE 00
2=CODING
STEADY
NAC Screen #3
NAC #
1=SYNC TYPE S
NAC Screen #4