28
FireLite SLC Wiring Manual — P/N 51309:R3 7/29/2019
Section 5: Monitor Modules
5.1 Descriptions
These addressable modules monitor conventional contact-type alarm initiating devices. You can configure module circuits as an NFPA
Class B or Class A Initiating Device Circuits (IDC). There is no limit to the number of contact-type devices installed on a monitor mod-
ule circuit.
5.1.1 Addressable Monitor Modules
MMF-300 Monitor Module
This is an addressable module that monitors either a Class B or Class A circuit of dry-contact input devices. This module is capable of
participating in degraded mode where supported by the FACP.
NOTE: For more information on the individual module specifications refer to the Installation Instructions that are provided with these
devices.
SLC–
SLC+
IDC Return –
IDC Return +
IDC Out +
IDC Out -
Rotary
Switches
Areas used to record the device
address and SLC number.
FMMtpH.wmf
Figure 5.1 MMF-300 Monitor Module
To Next Page
Loading...
