FocusPRO
™
TH5220D Non-programmable Digital Thermostat
3
This thermostat is ready to go!
Your new thermostat is pre-programmed by the installer and ready to use. Just
check the settings below and change if needed:
1
FFaann ((AAuuttoo//OOnn))::
Preset to Auto............................................To change, see page 6
Auto is the most commonly used setting, but you may
prefer On for improved air circulation.
2
SSyysstteemm ((HHeeaatt//CCooooll//AAuuttoo//EEmm.. HHeeaatt))::
Preset to Heat ..........To change, see page 7
You can select heating or cooling, or set the system
to control both systems automatically, if needed.
To Next Page
Loading...
