Operating Manual
..... o I
Press the SYSTEM button to select:
Heat
Cool
Note: The Auto and Em Heat
system settings may not appear,
depending on how your
thermostat was installed,
, Heat:Thermostat controls only the
heating system.
• Cool: Thermostat controls only the
cooling system.
• Off'. Heath_g and cooling systems are off:
• Auto: Thermostat automatically selects
heating or cooling depending on the
indoor temperature.
• Em Heat (only [or heat pumps with
auxifiary heat):Thernaostat controls
Emergency and Auxiliary Heat.
Compressor is locked out.
To Next Page
Loading...
