Operating Manual
69-2093EFS—07 18
In case of difficulty
Heating or cooling
system does not
respond
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Wait 5 minutes for the system to respond.
Screen displays
“No Signal”
Thermostat has lost radio contact with the wireless network (usually because of
a power outage). To restore power:
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
After power is restored, the thermostat will automatically restore wireless
communication within a few minutes.
To Next Page
Loading...
