10
Description of controls and indications
Controls
VERIFY
If the Verify facility has been set up, then pressing the Verify button in the event of a re condition increases the
time delay before the sounders are activated. This gives the user time to investigate the cause of the alarm and the
option of cancelling the alarm within the delay time period.
U1 U4to
These buttons can be congured during commissioning to action user-dened tasks, such as the disablement of
devices in areas where smoke may be generated due to maintenance work or where plant shutdown is required.
FIRE
The two ‘re events’ scroll buttons on the keyboard operate in exactly the same way as the two rst level access re
scroll buttons on the front door. These buttons are active when the door is open.
Qwerty keypad Allows the entry of alphanumeric data at the panel, such as a label given to a zone or device.
Enter
This button is pressed to acknowledge an entry of data such as a label.
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...
