Figure B.4 Proprietary Protective Signaling System
Form-C relay contact programmed to
activate on Supervisory condition.
Form-C Trouble contact which will
automatically activate on any Trouble
condition.
Form-C Alarm contact programmed to
activate on General Alarm.
FACP Main Board
Fire Alarm Control Panel
Notes:
1. Connection between the GF505/GF510 and the
transmitter are supervised by the transmitter.
2. This GF505/GF510 Transmitter arrangement can be
employed for NFPA 72 Proprietary Protective
Signaling System.
3.
Potter Electric Model EFT-C has not been tested for
UL 864 9th Edition and is for use in retrofit
applications only.
To Next Page
Loading...
