Master Programming Level Programming
Onboard DACT
The Onboard DACT (Digital Alarm Communicator/Transmitter) provides communication to a central sta-
tion. Pressing 2 while viewing the Option Module Screen will cause the following screens to be displayed:
Primary Phone
Press 1 while viewing Onboard DACT Screen to program the type of primary phone line being connected to
the DACT. The following screen will be displayed:
Press 1 to select Touchtone dialing, 2 to select Rotary dialing with a make/break ratio of 67/33, or 3 to select Rotary dialing with a
make/break ratio of 60/40.
Secondary Phone
Press 2 while viewing Onboard DACT Screen 1 to program the type of secondary phone line being con-
nected to the DACT. The following screen will be displayed:
Press 1 to select Touchtone dialing, 2 to select Rotary dialing with a make/break ratio of 67/33, or 3 to select Rotary dialing with a
make/break ratio of 60/40.
Central Station
Central Station programming configures the control panel DACT for contacting the central station. Press-
ing 3 while viewing Onboard DACT Screen 1 will cause the following screens to be displayed:
ANN-BUS
1=ANN-AUDIO OPTIONS
2=ANN-SEC ENABLE NO
ANN-BUS Screen #3
ON BOARD DACT
1=PRIM PHONE TCH TNE
2=SCND PHONE TCH TNE
3=CENTRAL STATION
ON BOARD DACT
1=SERVICE TERMINAL
2=SUPERV PHONE LINE
Onboard DACT Screen 1
Onboard DACT Screen 2
OPTION MODULES
1=ANN-BUS
2=ON BOARD DACT
Option Module Screen
PHONE LINE
1=TOUCHTONE
2=ROTARY 67/33 (EURO)
3=ROTARY 60/40 (U.S.)
Primary Phone Type Screen
ON BOARD DACT
1=PRIM PHONE
2=SCND PHONE
3=CENTRAL STATION
Onboard DACT Screen #1
PHONE LINE
1=TOUCHTONE
2=ROTARY 67/33 (EURO)
3=ROTARY 60/40 (U.S.)
Secondary Phone Type Screen
ON BOARD DACT
1=PRIM PHONE
2=SCND PHONE
3=CENTRAL STATION
Onboard DACT Screen #1
CENTRAL STATION
1=REPORTING NO
2=REPORT STYLE
FIRST AVAILABLE
Central Station Screen #1
CENTRAL STATION
1=PRIMARY
2=SECONDARY
3=CALL LIMIT 0
Central Station Screen #2
GF505 & GF510 Manual — P/N 53164:B5 6/12/2018
65
To Next Page
Loading...
