Honeywell Granit 1280i - Decode Security; Continuous Scan Mode; Output Sequence Overview; Output Sequence Editor

3 - 16
Default = Low.
Note: Increasing the security level may decrease the scan speed.
Note: When operating in Continuous Scan Mode, the scanner’s upper operating temperature is 104°F (40°C).
Note: To make Output Sequence Editor selections, you’ll need to know the code I.D., code length, and character match(es)
your application requires. Use the Alphanumeric symbols (inside back cover) to read these options. You must hold
the trigger while reading each bar code in the sequence.