Honeywell Granit 1911i - Beeper and LED Sequences and Meaning

3 - 7
Beeper and LED Sequences and Meaning
The scanner contains LEDs on the rear of the unit that indicate linking status,
decoding state, and battery condition. The base has LEDs on the top of the unit
that indicate its power up, communication, and battery charge condition. The
red LED = error; green LED = success of any type. Scanners and the CCB01-
010BT base have audible indicators as well: 1 razz or error tone = error; 2
beeps = menu change; 1 beep = all other successes.
The table below lists the indication and cause of the LED indication, beeps, and
vibrations for the scanner.