Honeywell Granit 1980i - Page 302

282 Xenon/Granit User Guide
Symbologies
All Symbologies All Symbologies Off ALLENA0 178
All Symbologies On ALLENA1 178
Codabar Default All Codabar
Settings
CBRDFT 179
Off CBRENA0 179
*On CBRENA1 179
Codabar Start/Stop Char. *Don’t Transmit CBRSSX0 179
Transmit CBRSSX1 179
Codabar Check Char. *No Check Char. CBRCK20 179
Validate, But Don’t Transmit CBRCK21 179
Validate, and Transmit CBRCK22 179
Codabar Concatenation *Off CBRCCT0 180
On CBRCCT1 180
Require CBRCCT2 180
Codabar Message Length Minimum (2 - 60) *4 CBRMIN## 181
Maximum (2 - 60) *60 CBRMAX## 181
Code 39 Default All Code 39
Settings
C39DFT 181
Off C39ENA0 181
*On C39ENA1 181
Code 39 Start/Stop Char. *Don’t Transmit C39SSX0 181
Transmit C39SSX1 181
Code 39 Check Char. *No Check Char. C39CK20 182
Validate, But Don’t
Transmit
C39CK21 182
Validate,
and Transmit
C39CK22 182
Code 39 Message Length Minimum (0 - 48) *0 C39MIN## 182
Maximum (0 - 48) *48 C39MAX## 182
Code 39 Append *Off C39APP0 183
On C39APP1 183
Code 32 Pharmaceutical (PARAF) *Off C39B320 183
On C39B321 183
Code 39 Full ASCII *Off C39ASC0 183
On C39ASC1 183
Code 39 Code Page C39DCP 183
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page