Honeywell Granit XP 1990iSR - Chapter 11 - Product Specifications; Granit XP SR and XR 1990 i Corded Scanner Specs

Granit XP User Guide 245
User-Specified Range 0 - 30,000 ms DLYRRD##### 95
2D Reread Delay *2D Reread Delay Off DLY2RR0 95
Short (1000ms) DLY2RR1000 95
Medium (2000ms) DLY2RR2000 95
Long (3000ms) DLY2RR3000 95
Extra Long (4000ms) DLY2RR4000 95
Character Activation Mode *Off HSTCEN0 95
On HSTCEN1 95
Activation Character (Range 0-
255) *12 [DC2]
HSTACH### 96
Do Not End Character Activation
After Good Read
HSTCGD0 96
End Character Activation After
Good Read
HSTCGD1 96
Character Activation Timeout
(Range 1 - 300,000) *30,000 ms
HSTCDT###### 97
Character Deactivation Mode *Off HSTDEN0 97
On HSTDEN1 97
Deactivation Character (Range 0-
255) *14 [DC4]
HSTDCH### 97
Illumination Lights *Lights On SCNLED1 98
Lights Off SCNLED0 98
Aimer Delay 1 millisecond SCNDLY1 98
250 milliseconds SCNDLY250 98
500 milliseconds SCNDLY500 98
*Off (no delay) SCNDLY0 98
User-Specified Aimer Delay Range 0 - 4,000 ms SCNDLY#### 99
Aimer Mode Off SCNAIM0 99
*Interlaced SCNAIM2 99
Single Code Centering Single Code Centering DECWIN1;DECTOP49;DECBOT
51;DECRGT51;DECLFT49
100
Centering Window Centering On DECWIN1 101
*Centering Off DECWIN0 101
Left of Centering Window (*40%) DECLFT### 102
Right of Centering Window
(*60%)
DECRGT### 102
Top of Centering Window (*40%) DECTOP### 101
Bottom of Centering Window
(*60%)
DECBOT### 102
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page