Honeywell Granit XP 1990iSR - Chapter 12 - Maintenance and Troubleshooting; Device Maintenance Guidelines; Cleaning the Scanner and Window

Granit XP User Guide 255
MSI Default All MSI Settings MSIDFT 177
*Off MSIENA0 177
On MSIENA1 177
MSI Check Character *Validate Type 10, but Don’t
Transmit
MSICHK0 178
Validate Type 10 and
Transmit
MSICHK1 178
Validate 2 Type 10 Chars, but
Don’t Transmit
MSICHK2 178
Validate 2 Type 10 Chars and
Transmit
MSICHK3 178
Validate Type 11 then Type 10
Char, but Don’t Transmit
MSICHK4 178
Validate Type 11 then Type 10
Char and Transmit
MSICHK5 178
Disable MSI Check Characters MSICHK6 178
MSI Message Length Minimum (4 - 48) *4 MSIMIN## 179
Maximum (4 - 48) *48 MSIMAX## 179
GS1 DataBar Omnidirectional Default All
GS1 DataBar Omnidirectional
Settings
RSSDFT 179
Off RSSENA0 179
*On RSSENA1 179
GS1 DataBar Limited Default All GS1 DataBar Limited
Settings
RSLDFT 180
Off RSLENA0 180
*On RSLENA1 180
GS1 DataBar Expanded Default All GS1 DataBar
Expanded Settings
RSEDFT 180
Off RSEENA0 180
*On RSEENA1 180
GS1 DataBar Expanded Msg.
Length
Minimum (4 - 74) *4 RSEMIN## 180
Maximum (4 - 74) *74 RSEMAX## 180
Trioptic Code *Off TRIENA0 181
On TRIENA1 181
Codablock A Default All Codablock A Settings CBADFT 181
*Off CBAENA0 181
On CBAENA1 181
Codablock A Msg. Length Minimum (1 - 600) *1 CBAMIN### 182
Maximum (1 - 600) *600 CBAMAX### 182
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry
Page