Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev B 105
06/10
Troubleshooting
Problem Possible Solutions
No Power
Check the power cord connections
Check power at the outlet
No Live Video
Check camera video cable and connections
Check monitor video cable and connections
Check camera power
Check camera lens setting
Live Video Too
Bright
If a cable is attached to the video channels looping
output, make sure that it is properly terminated.
DVR has stopped
recording
The HDD is full, delete video or set the DVR Overwrite
Mode to On in Disk Configuration > Overwrite.
To Next Page
Loading...
