Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev B 35
06/10
SMART Check
S.M.A.R.T. = Self Monitoring Analysis & Reporting Technology.
Enable SMART Check to detect signs of HDD failure.
1. Set ENABLE S.M.A.R.T. to ENABLE or DISABLE.
2. Set a CHECK INTERVAL between 1 and 24 hours.
3. Define a TEMP THRESHOLD and select Celsius or Fahrenheit.
Note The recommended upper optimum operating temperature for the
HDD is between 104F to 122F (40C to 50C).
4. Select a S.M.A.R.T. WARNING to be activated when the HDD reaches
the defined threshold.
5. Select SAVE and press ENTER to save settings.
Tip Select HDD INFORMATION and press ENTER to view the current
HDD, DVD, and USB drive information.
To Next Page
Loading...
