Setup
______________________________________________________________________________________________
40
Spot / Sequence Configuration
Spot/Sequence Configuration allows you to set the parameters for the
SPOT OUT on the DVR and the local live view sequencing.
SPOT –Configure the SPOT OUT connection.
INTERVAL– 1 ~ 256 seconds [Set the sequence interval time].
POPUP –ON / OFF [When set to ON, this function interrupts the
sequencing when an event occurs, and switches to the event channel.]
CHANNEL SELECT – 1~16 / ALL [Select cameras to include in
sequence.]
SEQUENCE – Configure the appearance of the sequence on the live view
screen (MAIN/VGA).
PAGE DWELL TIME - 0 ~ 99 seconds [Set the sequence interval time
for full page].
To Next Page
Loading...
