Setup
______________________________________________________________________________________________
42
Record
Recording Configuration
Frame
ON/OFF – Enable or disable recording on individual camera channels.
SIZE – 352 × 240 / 704 × 240 / 704 × 480. [Resolution]
FPS – 1~30 [Recording Images Per Second]
QUALITY – Low / Normal / High
INTENSIVE – ON/OFF [Intensive Recording on sensor or motion event]
Note When a motion or sensor event occurs, INTENSIVE RECORDING
automatically increases the recording rate to the maximum IPS
that is available (based on your current recording configuration
frame rate) up to 30 IPS per channel. If events occur on multiple
channels with intensive recording enabled, the available IPS is
evenly distributed across those channels.
PREALARM – 0~5 seconds [Pre-Alarm Recording]
POSTALARM – 0~30 seconds [Post Alarm Recording]
To Next Page
Loading...
