Setup
______________________________________________________________________________________________
44
SENSOR
Orange
SENSOR-activated recording
In sensor mode, the DVR will record when a sensor is
triggered - during DURATION time as set in RECORD >
MOTION /EVENT CONFGURATION > ACTION.
CONT+MOT
Sky Blue
CONTINUOUS + MOTION detection recording
The DVR records in CONTINUOUS mode but switches
toMOTION when motion is detected in the motion area.
The DVR also will log a Motion Event and send the event
to the Remote Monitoring software.
If you set motion to OFF in RECORD > MOTION /EVENT
CONFGURATION and set CONT + MOT in SETUP >
RECORD > SCHEDULE the DVR will NOTrecord when
motion is detected.
CONT+SENS
Brown
CONTINUOUS + SENSOR-activated recording
In this mode, the DVR records continuously and switches
to SENSOR recording mode when a sensor is triggered.
The DVR also will log a Sensor Event and send the event
to the Remote Monitoring software.
MOT+SENS
Lilac
MOTION detection + SENSOR-activated recording
The DVR will only record when motion is detected or a
sensor is triggered.
To Next Page
Loading...
