Honeywell H.264 HRDP - Network and Event Configuration

Setup
______________________________________________________________________________________________
52
Network
Network Configuration
Configure network settings.
NETWORK TYPE – STATIC IP (User must manually define a static IP
address. Contact your network administrator for this information.)
DHCP (System gets IP address automatically from a DHCP server.)
IP ADDRESS – DHCP or Static. Contact your network administrator for this
information.
REMOTE PORT – When creating remote connections, the HRDP H.264
DVR uses multiple ports, the remote port is user defined (default 4000), and
a secondary port is automatically assigned (default 4002). The DVR assigns
the secondary port based on the remote port, in increments of two. (ex: if
you set the remote port to 4444, then the secondary port will be 4446).
Verify that all these ports are available when setting up Network Address
Translation (NAT) or firewall.
DDNS – DDNS (Dynamic Domain Name Service) is a service that allows a
connection to an IP address using a hostname (URL) address instead of a
numeric IP address. Most Internet Service Providers use Dynamic IP
Addressing that frequently changes the public IP address of your internet
connection; this means that remote connections through HFVMS and HRDP
Remote would require frequent updates. DDNS automatically redirects
traffic to your current IP address when using the hostname address (i.e.
MyHRDP.HWDDNS.com).