Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev B 73
06/10
Save Settings
Use the System Configuration menu to export and import saved or factory
default system settings.
Save Settings
1. Press the SETUP key on the front of the DVR or remote control to log in.
2. Select SYSTEM > CONFIGURATION.
3. Select an empty PROFILE and define a name for the settings
configuration. To save settings to a USB device, select EXPORT.
4. Select SAVE and confirm to continue the export process.
Import Settings
1. Press the SETUP key on the front of the DVR or remote control.
2. Select SYSTEM > CONFIGURATION and log in.
3. Select a previously saved PROFILE and select LOAD. To import a
profile saved on a USB device, select IMPORT.
4. Select the types of settings to import (CAMERA – RECORD – SYSTEM –
NETWORK).
5. Select OK and press ENTER on the front of the DVR to complete the
import process.
To Next Page
Loading...
