Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev B 77
06/10
Using the Remote Software
Setting the Time and Date
The Remote Software uses the system time of the PC. If the system time is
not correct, follow the steps below to change it.
1. Exit to Windows by clicking the Exit button on the Live View screen and
selecting Restart in Windows Mode.
2. Open Windows Explorer. Do this by right-clicking the My Computer
Icon (located on the top left hand corner of the Desktop) and select
Explore.
3. Click Control Panel to open it. If you do not see Control Panel listed,
click My Computer to expand the folder tree.
4. Double-click Date and Time inside Control Panel.
5. Adjust the Date and Time.
6. When finished, close all open windows and restart the PC. Do this by
clicking Start (located on the lower left hand side of the Desktop) and
selecting Shut Down.
To Next Page
Loading...
