Honeywell H.264 HRDP - Saving a Video Clip

Remote Software
______________________________________________________________________________________________
84
Saving a Video Clip
1. Perform a basic search to locate the desired clip.
2. Click Save to open the Export Wizard.
3. Click JPEG or AVI to select the desired file type.
AVI File
a. Select Mark Digital
Signature.
c. Select a Compression
Codec. Each codec provides
different levels of quality,
compatibility and file-size.
d. Enter the duration
(seconds) to record. Although
50 is the longest time displayed,
a longer recording may be
entered manually.
e. Select Quality - 50>100. When size is not an issue, set quality to 100.
JPEG File
a. Select Mark Digital Signature.
4. Click Next.
5. Define the file name in the Export Name box.
6. Define the location to save the file by using menu tree below Export Path.
7. Click Next.
8. A message displays to confirm that the save was successful.
9. Click OK. The Export Wizard will display the name, location and size of
the file.
10. Click Finish.