Honeywell H.264 HRDP - Using the Graphical PTZ Controller

Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-06801 Rev B 87
06/10
Using the Graphical PTZ Controller
•
Use the Arrow buttons to control the direction of the PTZ camera.
• To select a new camera, click the video display of a different
camera on the Live View screen.
Note Eight directions are available only for select protocols. Only four of
the PTZ Control buttons work for all protocols (UP, DOWN, LEFT,
RIGHT).
Activate
Corresponding
Preset Position
Current
Camera
Arrow Buttons