Honeywell
41
Video Loss
In Figure 4-13, select “Video Loss” from the type list. You can see the
interface is shown in Figure 4-18. This function allows you to be informed
whe
n video loss has occurred. You can enable the alarm output channel
and enable the show message function.
Tips:
You can enable preset activation operation when video loss occurs.
See Motion Detection on page 37 for detailed information.
Figure 4-18
Menu of Video Loss
Camera Masking
When someone viciously masks the camera lens, the system can alert you
to guarantee video continuity. Camera masking interface is shown as in
Figure 4-19.
Tips:
You c
an enable preset/tour/pattern activation operation when video loss
occurs.
See Motion Detection on page 37 for detailed information.
To Next Page
Loading...
