Honeywell HDZ36EX - Deleting a Recording Schedule Setting; Figure 7-15 Recording Schedule Screen

Configuring System Settings | 127
800-11873V4 - A - 07/2014
Note Motion recording, alarm recording and network failure recording are separate
from scheduled recording and must be enabled/disabled in their respective tabs.
4. If Only during time frame is selected in step 3, select the check boxes for the days of the
week that you want recording to occur, and enter the Start time [hh:mm] and Duration
[hh:mm] in the fields provided. You can configure up to 10 recording schedules (select the
schedule to configure, 1–10, in the schedule window and then enter your settings).
5. Click Save to save your settings. If you are setting up multiple recording schedules, click
Save after setting each one.
Deleting a Recording Schedule Setting
1. Navigate to System  Recording (see Figure 7-15).
2. Select one of the recording schedules in the schedule window and click Delete.
Figure 7-15 Recording Schedule Screen