www.honeywell.com/security
128 | HDZ Series IP PTZ User Manual
Schedule Settings
The Schedule function allows users to set up schedules that can be used with different camera
features such as alarm inputs, motion detection, network failure detection, and periodical
events. The schedules function supports up to 10 schedule time frames in the time frame list.
Configuring a Schedule
To configure a schedule to be used with other IP camera features:
1. Navigate to System
Schedule (see Figure 7-16).
Figure 7-16 Schedule Screen
2. Select a time frame to configure from the list of 10 time frames in the time frame list (time
frame 1 is selected in Figure 7-16).
3. Select the check boxes for the days of the week that you want recording to occur.
4. Enter the Start time [hh:mm] and Duration [hh:mm] in the fields provided.
Note When configuring the schedule, the Duration time is the number of hours and
minutes that recording will continue from the Start time.
5. Click Save to save your settings. If you are setting up multiple schedule time frames, click
Save after setting each one.
To Next Page
Loading...