Configuring PTZ Settings | 59
800-11873V4 - A - 07/2014
Deleting a Preset Point
1. Navigate to PTZ Preset (see Figure 5-1).
2. Under Preset setting, in the Num drop-down list, select the number of the preset that you
want to delete.
The first drop-down list contains preset numbers 1 through 10. The next list contains
numbers 11 through 20, and so on, up to 256. Click NextPage to go to the next list of
preset numbers. Click PrePage to return to the previous list of numbers.
3. Click Delete to delete the selected preset point.
Go to a Preset Point
1. Navigate to PTZ Preset (see Figure 5-1).
2. Select the preset point you want to go to in the Preset go drop-down list.
If the preset you want to go to does not appear in the drop-down list, click NextPage or
PrePage in the Preset setting area until the correct preset list is selected.
Note You can also go to a preset on the home page of the PTZ web client interface
(see Figure 3-6 on page 41). Enter the preset number in the Preset Details field
and click Goto to have the camera move to view the selected preset point.
Mimic Tour Settings
You can program up to eight mimic tours that can be recalled at a later time.
Programming a Mimic Tour Path
1. Navigate to PTZ Mimic Tour (see Figure 5-2).
To Next Page
Loading...