www.honeywell.com/security
110 | Performance Series Full PoE Network Video Recorder User Guide
Configuring Alarm Input Settings
Configuring IPC External Alarms
To configure IPC external alarms
1. Go to Main Menu > SETTING > EVENT > ALARM > IPC Ext Alarm.
Figure 8-10 IPC External Alarm Configuration Tab
2. On the IPC Ext Alarm tab, select channel from the drop-down menu.
3. Select the Enable check box to enable alarm detection of the selected alarm input.
4. In the Device Type box, select the alarm input type: Normal Close or Normal Open.
To Next Page
Loading...
