supplied IR remote control. The following table describes basic remote control operations.
Button Action
1 Power Turn the NVR on/off.
2 Add (Address) Enter the number of the device that you want to control.
3 Forward Increase the forward playback speed.
4 Slow Play Decrease the forward playback speed.
5 Next Record Select the next video for playback.
6 Previous Record Select the previous video for playback.
7 Play/Pause Pause/resume forward playback.
In the live view mode, enter the video search mode.
8 Reverse/Pause Pause/resume reverse playback.
9 Esc Return to the previous menu or cancel the current operation.
10 Rec Manually start/stop recording.
While in the recording interface, use the direction buttons to
select the recording channel. Press and hold the record
button to enter the manual recording interface.
11 Direction Keys Use the left/right keys to switch the currently activated
control.
While in playback mode, use the up/down buttons to
change the playback channel.
12 Enter Go to the default. Go to the menu.
13 Mult Switch between the multi-channel view and the
single-channel view.
14 Fn In the single-monitor mode, use the popup assistant
function, control PTZ cameras or adjust video color.
In PTZ control mode, switch the PTZ control menu.
In text mode, press and hold the button to delete the last
character.
15 Alphanumeric
Keys
Enter passwords or switch channels. Press
Shift
to switch
the input method.
To Next Page
Loading...
