Honeywell HEN16142 - Expanded PTZ Control Panel

Viewing Live Video | 53
800-21090V2 - A - 03/2016
Expanded PTZ Control Panel
Figure 3-6 Expanded PTZ Control Panel
Table 3-4 Expanded PTZ Control Panel
To display the PTZ control panel
1. Right-click anywhere on the screen to display the shortcut menu.
2. Click Pan/Tilt/Zoom. The PTZ control panel opens.
3. To expand the PTZ control panel, click the arrow at the right side of the panel.
2
6
5
3 4
7 8 9
1
# Name Function
1 Preset, Tour, Pattern Configure/call PTZ functions.
2 No. Enter number of PTZ function to call.
3 Aux Call auxiliary functions.
4 Enter Menu Enable up-the-coax OSD menu configuration for non-PTZ camera.
5 AutoScan Cause camera to continually pan between two points that you have
defined.
6 AutoPan Cause camera to continually rotate 360 degrees.
7 Flip Cause camera to rotate 180 degrees.
8
Reset Restore default settings.
9 Aux Config Configure auxiliary functions.