Viewing Live Video | 55
800-21090V2 - A - 03/2016
To program a preset
1. On the expanded PTZ control panel, click the Preset button.
The Pan/Tilt/Zoom window opens.
2. Use the direction arrows to point the camera where you want to set as the preset, and then
click Set.
3. In the Preset box, enter a number for the preset, and then click Set to save your settings.
• To program additional presets, repeat steps 1 through 3.
• To delete a preset, enter the number of the preset that you want to delete in the Preset
box, and then click Del Preset.
Note Some protocols do not support the Del Preset function.
To Next Page
Loading...
