www.honeywell.com/security
108 | HRGX DVR User Manual
Configuring Multicast Settings
Multicast allows multiple simultaneous views of the same live video stream over a network.
To configure multicast:
1. Go to Menu > Settings > Network > More Settings.
2. In the Multicast IP field, enter a multicast address for the DVR. It is recommended that you
use an IP address in the range of 239.252.0.0 to 239.255.255.255.
Note When adding a device using Multi-Site 4200 or other CMS software, the multicast
address must be the same as the multicast IP of the DVR.
3. Click Apply to save your settings.
To Next Page
Loading...
