Configuring Network Settings | 111
800-16694 - A - 04/2014
Testing Network Delay and Traffic Loss
You can test network delay and traffic loss and check whether the network is operating normally.
To test network delay and traffic loss:
1. Go to Menu > Maintenance > Net Detect > Network Detection.
2. Under Network Delay, Packet Loss Test, in the Destination Address field, enter the IP
address of the packet destination.
3. Click Test button to start testing network delay and packet loss. A message will appear
telling you whether the test succeeded or failed.
To view network status:
1. Go to Menu > Maintenance > Net Detect > Network Detection.
2. Click Status to check the network status. If the network is operating normally, the
message "Network status is normal" appears. If the network is not operating normally, you
can click Network to review and edit your network settings.
To Next Page
Loading...
