Configuring Camera Settings | 127
800-16694 - A - 04/2014
Configuring Privacy Masks
You can configure up to four privacy mask zones for each camera. Privacy mask zones conceal
portions of the scene from the view of the operator.
To add a privacy mask zone:
1. Go to Menu > Camera > Privacy Mask.
2. Select the camera you want to create a privacy mask for by clicking a number in the
Camera drop-down list.
3. Select the Enable Privacy Mask check box.
4. Drag the mouse over the area you want to mask on the preview window to draw a privacy
mask zone. You can mask up to four areas.
To Next Page
Loading...
