Honeywell HRGX41 - Protecting Recorded Video Files

www.honeywell.com/security
64 | HRGX DVR User Manual
Protecting Recorded Files
You can lock individual recorded video files or set the HDD property to read-only to protect
recorded video from being overwritten. You can also disable the default overwrite setting in
Menu > Record > Advanced.
Note To set the HDD property to read-only, the storage mode of the HDD must be set
to Group. See Configuring HDD Groups, page 117.
To lock recorded video files:
1. Go to Menu > Clip Search > Normal.
2. Under Normal, select the channel(s) you want to search, or click Analog to select all the
channels.
3. Configure the following search parameters:
Note The start and end search points must fall within the range listed next to Start/End
time of record.
•Record Type Select one of the following recording types: Normal , Motion ,
Alarm , Motion |Alarm , Motion & Alarm , Manual , or All .
•File Type Select one of the following file types: Unlocked , Locked , or All .
•Start Time Select the date and time for the start point of the search.
•End Time Select the date and time for the end point of the search.