24 | HRGX DVR Getting Started Guide
www.honeywell.com/security
9. Specify the recording settings for each camera that is connected to your DVR. To copy the
same settings to one or more additional cameras, click Copy, select the check boxes of
the channel(s) that you want to copy the settings to (or select the Analog check box to
select all the channels), and then click OK.
10. Click Next to continue to the next screen.
11. Motion detection is disabled for all channels by default. Click the channel(s) that you want
to enable motion detection for, or click Analog to select all channels, and then click OK.
To Next Page
Loading...
