Configuration
Rev 3.01 22 Document 900.0258
10/05
Initial Unit Setup
Before using your DVR for the first time, you should establish the initial settings. This
includes items such as time and date, display language, camera, audio, remote control,
record mode, network and password. Your DVR can be set up using various screens
and dialog boxes.
1. Press MENU to enter the setup screens. The Admin Password screen displays.
Figure 3-2 Admin Password Screen
2. Enter the password by pressing the appropriate combination of Camera number
buttons and then Enter (# ). The factory default password is 4321. There are two
Setup screens: Quick Setup and Normal Setup. The factory default is the Quick
Setup screen.
Note The setup screens can also be accessed by entering the User
password if the User password is turned on. However, only
access to the Clip Copy and Password setup screens is
permitted.
To Next Page
Loading...
