Configuration
Rev 3.01 64 Document 900.0258
10/05
Figure 3-45 Port Number Setup Screen
Note Obtain the appropriate Port Number for each RAS related
program (Admin, Watch, Search, and Callback) from your
network administrator.
5. Change the numbers by highlighting them and using the Up and Down Arrow
buttons or the Jog Dial to increase or decrease the number.
The factory default Port settings are:
Note The system restarts automatically after changing the port
settings.
Note Do not use the same port number for two different programs;
otherwise, the DVR cannot be connected with a PC running RAS.
Admin 8200
Watch 8016
Search 10019
Callback 8201
To Next Page
Loading...
