Operation
Rev 3.01 84 Document 900.0258
10/05
PTZ Mode
The DVR controls cameras with Pan, Tilt and Zoom capabilities. Press PTZ to enter the
PTZ mode. You can control the camera using front panel control buttons or by setting
up presets.
Press STOP in PTZ mode to display the PTZ menu.
Figure 4-2 PTZ Menu
• Select Set Preset to set the presets for a PTZ camera.
• Select Set Speed to set the pan and tilt speed for a PTZ camera.
• Select Quit to close the menu.
You can save camera position settings as presets so that you can go directly to desired
views. After you have the camera at the desired settings, press STOP, then select Set
Preset in the PTZ menu.
Figure 4-3 PTZ Preset Screen
1. Select the number you want to assign to the preset and then press # . Use the
virtual keyboard to enter the preset name.
Control buttons Function
Left and Right arrows Pan left and right
Up and Down arrows Tilt the camera up and down
SEARCH Zoom in
PLAY/PAUSE Zoom out
RW, FF Focus the image
To Next Page
Loading...
