EasyManua.ls Logo

Honeywell HRHD9+ - Quick Setup Screen

Honeywell HRHD9+
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuration
Rev 3.01 23 Document 900.0258
10/05
Quick Setup Screen
Figure 3-3 Quick Setup Screen
Use the Quick Setup screen to set up the most commonly used features of your DVR.
Use the Arrow buttons to move through the options. Pressing # lets you make your
selections.
Note If you enter the Quick Setup screen by entering the User
password, only Password setup is permitted.
1. Highlight the box beside Quick Setup and press # to toggle between On and Off.
If you select Off, you will use the Normal Setup screen to change the DVR
settings.
2. Highlight the Recording Speed box and select recording speeds from as few as
one image every 10 seconds to as fast as 60 ips.
Note The DVR has a maximum recording speed of 60 ips per camera,
however, the recording speed may not be achieved when
averaged over all cameras.
3. Highlight the Recording Quality box and select one of the options:
Very High, High, Standard, Low
4. Highlight the box beside Audio Recording and select either On or Off.

Table of Contents

Other manuals for Honeywell HRHD9+

Related product manuals