Configuring System Settings | 123
800-19403 - A - 12/2014
Exporting and Importing System Configurations
You can export and/or import DVR system configurations if you are installing several DVRs
requiring the same setup.
To export a system configuration
1. Go to Main Menu > Setting > System > Config Backup.
2. Insert a USB storage device (such as a USB flash drive) into one of the USB ports on the
DVR. The Find USB device dialog box opens.
3. In the Find USB device dialog box, click Config Backup.
4. On the Config Backup page, click Refresh. The page populates with the details of the
storage device.
5. Click Export. A message appears confirming that the export was successful and the
system configuration file (named Config_[YYYYMMDDhhmmss]) is added to the file list.
To Next Page
Loading...