www.honeywell.com/security
64 | Performance Series HQA Digital Video Recorder User Guide
Configuring the Text Overlay
To configure a camera’s text overlay settings
1. Go to Main Menu > Setting > Camera > Encode > Overlay.
2. In the Channel box, select the camera that you want to configure.
3. To set the time display, next to Time Display, select the Monitor check box, and then click
Set. Drag the time display to the desired position on the screen.
4. To set the channel display, next to Channel Display, select the Monitor check box, and
then click Set. Drag the channel display to the desired position on the screen.
5. To copy the settings to one or more additional cameras, follow these steps:
a. Click Copy.
b. Click the specific camera(s) that you want to copy the settings to, or click All to select
all the cameras, and then click OK.
To Next Page
Loading...